KASENIT SURFACE HARDENING COMPOUND 1LB (454 Grams)

KASENIT SURFACE HARDENING COMPOUND 1LB

 

KASENIT SURFACE HARDENING COMPOUND 1LB. Non-poisonous, non-explosive, and non-flammable. Easy-to-use compound case hardens plain and low carbon alloy steels. Carburizes surfaces quickly to uniform depth while retaining the toughness of the core. Also protects delicate, highly finished work, and helps eliminate the need for remachining. Simply apply the hardening compound to your metal parts, heat to the required temperature, then quench in oil or water for a professional grade, heat-treatment. Helps keep the edge sharp on expensive drill bits, milling and grinding tools, punches, firing pins, hammer davits, trigger pins, sears, and cocking pieces.

 

Manufacturer

14 250 Ft

5 in stock

WORLDWIDE SHIPPING CALCULATED AT CHECKOUT

KASENIT SURFACE HARDENING COMPOUND 1LB

 

APPLICATIONS

  • May be used on steel, cast, wrought or malleable iron.
  • Just brush on and then heat treat at up to 1,650° for 50 minutes.

FEATURES

  • A rapid compound for surface hardening.
  • Up to .020" case depths in 50 minutes.
  • For fine work & very rapid hardening.

 

INSTRUCTIONS:

Case Hardening Powder.
Use this for low carbon steels that you want a harder exterior surface on.
Case hardening on often found on lower cost files and has been used in the metal industry almost since the start of modern metal working.
Kasenit instantly case hardens steel parts with no special heat-treating equipment required.
Quickly and easily impart a hard case to steel tools, dies, gears, machined parts, metalworking parts, blades, and other wear parts.

Directions:
Thoroughly heat the part to cherry red in colour. Be sure the part (or section of the part to be hardened) is completely heated for best results.
Coat part in Kasenit compound.
Cover all surfaces to be hardened.
Compound will blister and harden.
Reheat part to cherry red colour.
Quench in water, oil, or let cool and brush off excess compound.

Safety Data Sheet

Click here for more gunsmithing products

 

 

Additional information

Manufacturer